Home > News >

Precautions For The Cutting Machine To Work

2019-04-12 14:30   admin

Here is Slitting Machine Manufacturer talking about Precautions for the cutting machine to work.
If you have any idea about Roll Mill Slitting Machine, welcome to contact us and discuss.
Slitting Machine Manufacturer
Before the automatic slitting machine is put into operation, check whether the working positions are properly adjusted. If lubrication is required, the lubricating grease should be added in advance. Check if the tool is sharp. After the automatic cutting machine is normal, you can run the empty car first, check whether there is any abnormality, and input the processing order into the computer to check the order in advance; after the automatic cutting machine is put into work, the equipment should be adjusted according to the production situation. Good working condition, ensure that the slitting machine is moderately indented, cut and burr-free, and the trimming position on both sides is suitable. Ensure that the cross-cutting machine has smooth paper feeding and accurate cutting length. For the vertical and horizontal cutting machine that is connected with production management, it is also necessary to monitor the operation of the machine. When the work is finished, clean the dust and paper scraps on the equipment in time, and the tool and grinding. The knife wheel is inspected, and the water in the oil purifier and the water tank are drained, and the operation part is checked for abnormality. Then, according to the instructions, cut off the power supply and maintain the computer operating system.
1. Ensure that the voltage, current and hydraulic equivalents are correct and stable before starting the machine.
2. Before the equipment is ready for operation, all personnel must notify the departure device to ensure personal safety before starting operation.
3. When running, do not touch the running film roll or roll core with your hand to avoid personal injury caused by hand entrapment.
4. During the operation, it is forbidden to scratch or cut each roller core with a knife or a hard object.
For more information about Hr Slitting Lines, please contact longarmachines@wxlongar.com or call us.