Home > News >

Slitting And Rewinding Machine Working Principle

2019-05-17 16:11   admin

1. The 4 Mm Slitting Machine and rewinding machine shall carry out the fixed length slitting processing of the whole coil or the whole raw material, for example, plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. 
2. The Industrial Cut To Length Lines can be set continuously. If there is an error in the actual cutting length, it is easy to calibrate by setting parameters.
4 Mm Slitting Machine
3. Slitting and rewinding machine slitting control is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, The slitting signal is sent out without stopping the machine, and the slitting machine dynamically cuts the machining during the movement of the material.
Structural advantages of the slitter rewinding machine:
The middle part of the slitter-rewinding machine is equipped with a spindle for processing paper tubes. The front end of the spindle is fixed on the base by a set of bearings, and a pulley is installed in the middle of a set of bearings; a compression cylinder is installed at a position close to the base, and the support of the cylinder The upper end of the rod is fitted with a set of support rod bearings to support the main shaft.
The main cutter shaft is mounted on the upper end of the slitter rewinding machine, and a plurality of blades are arranged thereon and arranged according to a certain gap; a support frame of the main cutter shaft is further disposed at the top of the slitter rewinding machine, and the support frame of the support cutter A support cylinder is installed in the middle.
The structural advantages of the slitter rewinding machine fill the gap in the technology of the automatic pipe cutting machine.