What Is The Working Principle Of The Slitter Rewinder?

2019-09-21 15:36   admin

1. The Slitter Rewinder shall carry out the fixed length slitting processing of the whole coil or the whole raw material, for example, plastic packaging materials, packaging cartons, steel plates, film, leather, wood chips, etc. Cut control.

2. The cutting length can be set continuously. If there is an error in the actual cutting length, it is easy to calibrate by setting parameters.

3. Slitting and rewinding machine slitting control is divided into static and dynamic slitting: it stops accurately when the set length arrives, then static slitting processing, restarts after slitting; when the set length arrives, The slitting signal is sent out without stopping the machine, and the slitting machine dynamically cuts the machining during the movement of the material.

Slitter Rewinder

Structural advantages of the slitter rewinding machine shared by Slitter Rewinder Machinery Manufacturer:

The middle part of the slitter-rewinding machine is equipped with a spindle for processing paper tubes. The front end of the spindle is fixed on the base by a set of bearings, and a pulley is installed in the middle of a set of bearings; a compression cylinder is installed at a position close to the base, and the support of the cylinder A support rod bearing is mounted on the upper end of the rod to support the main shaft.

A main cutter shaft is mounted on the upper end of the slitter rewinding machine, and a plurality of blades are arranged thereon and arranged according to a certain gap; a support frame of the main cutter shaft is further disposed at the top of the slitter rewinding machine, and the support frame of the support cutter A support cylinder is installed in the middle.

The structural advantages of the slitter rewinding machine fill the gap in the technology of the automatic pipe cutting machine.
 

If you want to know more information about Mini Slitter, feel free to contact us.