Slitting Machine Characteristics And Operational Requirement

2019-10-11 18:01   admin

Slitting Machine is a kind of mechanical equipment for slitting wide-width paper, mica tape or film into a plurality of narrow-width materials. It is commonly used in papermaking machinery, wire and cable mica tape and printing and packaging machinery, and can process a large roll of paper and film. Non-woven fabrics, aluminum foil, mica tape and other thin materials are cut into small rolls of different widths, which are commonly used in papermaking machinery and printing and packaging machinery. The main application of slitting machine is: non-woven fabric; mica tape, paper, insulating material and various film materials, especially suitable for narrow tape (non-woven fabric, paper, insulating material, mica tape, film, etc.) cut. So what are the advantages of using it? Or what is the characteristic of the slitter? We are Slitting Machine Manufacturer. I believe our answer is professional. Let's look down together.
 

The operation control panel is relatively simple, the various parts of the machine are controlled, and the panel is operated. Three-stage length setting: advanced three-stage lookup count to ensure accurate winding length. The automatic exchange axis is used, and after the winding operation is completed, the two axes are automatically exchanged, and the operation is simple and the efficiency is high. It can indicate the labeling. When it reaches the length of the labeling, it will automatically stop. Attach the label mark indicating the film opening on the platform. After the feeding, take the material from the back side of the operation surface and attach the rubber pressure roller to reduce the tearing. The noise of the tape and the smooth discharge. So what should you pay attention to when cutting the machine? Take the slitter rewinder as an example. First, you need to understand the characteristics of the slitter rewinder.
 

1. Winding adopts 3 inch air-expanding reel and magnetic powder tension controller to wind up, the cutting operation is simple, the maximum winding diameter can reach 600mm; the winding is beautiful and neat;

2. The cutter can use an industrial surgical blade or a flat knife (artificial blade) adjustable between 18mm and 1600mm;

3. The spindle and the circular knife use the stepless speed change system, which can be used as the high and low speed regulation and forward and reverse switching control; the electronic speed control system is convenient and simple;

4. Configure double-sided diamond grinding and sharpening system; sharpen the blade without disassembly, keep the blade sharp for a long time; achieve the best cutting quality; and attach the dusting capacity to keep the cloth and track clean;

5. Imported precision ball screw and slide rail, parallel advancement cutting width, stepless adjustment of imported AC motor adjustment system and control of cutting speed, so as to achieve high-precision cutting, the accuracy can be controlled within 0.1 mm;

6. Equipped with high-precision correcting device system to further ensure cutting accuracy.
 

Once we have the characteristics, we can operate. When operating, pay attention to the slitting machine to carry out fixed length slitting of the whole roll or the whole raw material. The fixed length cutting control controls the cutting precision and ensures the consistency of the finished product length. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
 

The above is about the characteristics of the slitting machine and the operating precautions, I hope to help you. If you want to know more about the slitting machine, you can contact us, we produce all kinds of slitting machines, as well as Rotary Shears and other products, welcome you.