How To Choose The Right Slitter Blade?

2020-01-08 10:58   admin

Slitter Blade is an important component on slitter equipment. It is mainly used to cut large coils into small coils of different specifications according to process requirements. Improper selection of the slitter blade, if it is not selected according to the mechanical configuration, the slitting index product requirements will not be met, the slitting material will cause burrs and a large amount of slitting dust. Not only will it reduce the accuracy and speed of slitting, but it will also consume raw materials. It is also easy to cause the shortening of the service life of the cutting blade, which increases the production cost. Below Metal Steel Coil slitting Machine Exporter will tell you how to choose the right slitter blade.
 

Slitter Blade
 

1. There are two main methods for cutting circular knife: upper and lower disc knife cutting and circular knife extrusion type slitting. Circular knife slitting is the main slitting method for slitting thick film, composite thick film, paper and other materials. Cutting material The thickness of the film is more than 100um.
 

2. The upper and lower disc slitting blade methods are widely used, mainly tangential slitting and non-tangential slitting. The tangent cutting is the material cutting from the tangential direction of the upper and lower disc knives. This kind of slitting is more convenient. The upper disc knife and the lower disc knife can be adjusted according to the slit width requirements. Its disadvantage is that the material is easy to drift at the slit, so the accuracy is not high, and it is generally not used now. Non-tangent cutting is that the material has a certain angle with the lower disc knife. The lower disc knife falls and cuts the material. This cutting method can make the material less likely to drift, and the cutting accuracy is high. However, the knife adjustment is not very convenient. When the lower disc knife is installed, the entire shaft must be removed. Round knife slitting is suitable for slitting thicker composite film and paper.
 

3. The application of circular knife extrusion slitting in the industry is not very common. It is mainly composed of synchronized with the speed of the material and a certain angle with the material, a bottom roller and a convenient pneumatic slitting knife. This slitting method can not only slit thinner plastic films, but also slit thicker paper and non-woven fabrics. It is a more convenient cutting method, and it is also a development direction of the cutting machine.
 

4. When choosing the blade of the cutting machine, it must be suitable for the blade of the machine. Some users always one-sidedly and objectively pursue imported blades, but ignore the blades that should be matched with their own models. Without distinguishing the application of the blade and its own purpose, it is considered that only imported blades are good and durable blades. In fact, whether it is imported or domestic, it is only suitable for the product application, is the appropriate blade.
 

5. The advantages and disadvantages of the slitter blades are relative. The key to the cutting effect of the blades lies in the application. For example, improper application of imported blades will not have good results, and domestic blades will also have good results if they are properly applied.
 

The above is the method of selecting slitter blades introduced by Slitting Machine Manufacturer. Hope to help everyone.