Requirements For Safe Operation

2020-01-15 16:31   admin

Metal Slitting Machine is a kind of equipment for longitudinal slitting of wide roll materials. The slitting machine structure is a device consisting of unwinding (unwinding), positioning of primers, slitting and slitting, and winding (rewinding). Its main function is to cut a wide roll of material into a narrow certain size roll in the length direction to prepare for other processing steps in the future.

Advantages of metal slitting machine: reasonable layout, convenient operation, high degree of automation, high production efficiency, high work precision, can process all kinds of cold rolled, hot rolled coil, silicon steel plate, stainless steel plate, color plate, aluminum plate, and after plating or Various metal plates after painting.

Metal slitting machine features:

1. Each part of metal slitting equipment is controlled, centralized panel operation, easy to operate.

2. The main functions of the panel include: two-stage length counting, the labeling position is not affected by the stop positioning of the tape; the labeling length counting; the cycle counting; the speed display; the second start, the fixed-point automatic exchange axis

3. Automatic axis exchange: After the winding operation of the slitting equipment is completed, the two axes are automatically exchanged, which is easy to operate and has high efficiency.

4. It has a bow-shaped unrolling wheel: This kind of unrolling wheel is a unique bow-shaped design, which completely eliminates the wrinkling of the tape during the unrolling or feeding process.

5. Pneumatic brake: when the slitting equipment is stopped, the tape can be stopped instantly, the positioning is accurate, and the labeling is accurate.

6. Feeding adjustment wheel: the material shaft can be locked by pressing the handle lightly, and the adjustment of left and right displacement is easy.

7, with low-noise facilities: the raw material shaft pressure roller is equipped with a muffler device, the noise during the stripping operation is reduced to a lower level.

8. Slitting equipment The tape taken up after slitting is clear and transparent.
 

Slitting Machine
 

The safe operation instructions of the metal slitting machine at work are as follows:

1. After the slitter is powered on, do not open the electric control door at will and touch the electrical components with your hands to prevent electric shock from hurting people;

2. The operator must not leave long hair, operate the machine with gloves, tightly cuff the clothes (except for loading and unloading knives), and do not touch the roller by hand during the operation of the machine;

3. Make sure that the Slitter Knife part is locked. Do not touch it by hand during operation. Do not place the head too close to the material and the roller when visually checking the operation. Attention when operating the machine;

4. The operator operates strictly in accordance with the operating procedures and has the qualifications for employment. Do not lean your body against any part of the machine while the machine is running;

5. When the machine is running, do not hit the control box door at will, and touch the transmission part with your body or hand, head;

6. Pay attention to the coordination of the strength and the fixed position of the unloading when loading, to prevent the raw materials from falling off and hurting the feet. When unloading, pay attention to brake the pulley of the unloading arm to prevent the unloading arm and the take-up shaft from falling off the material and hurting the feet;

7. When opening and closing the door, be careful not to place your hand on the mechanism to prevent pinching. Do not touch the clamping lever and the clamping wheel during operation. Various tools must not be placed on any part of the machine.

The above are the characteristics of the metal slitting machine introduced by Slitting Machine Manufacturer. Hope to help you.